PROCESSES
Current location :Home - PROCESSES

PROCESS

Aerate, inoculate, filter, decontaminate, incinerate and distill or re-filter to break contaminated water into component parts capable of treatment. We recover approximately 96% of all water leaving residual solids and chlorides in a manageable form or fuel.

COAL SEAM AND METHANE GAS SOLUTION OVERVIEW

EQUIPMENT & PROCESS FLOW INNOVATIVE PATENT PENDING

- Intense aeration and comprehensive mixing, (for incorporating an inoculant), consumes up to 60% less energy than current systems.  The resultant intense, aerobic digestion and homogenisation digests biological and organic materials, oxidises and coagulates heavy metals and other contaminants including some chlorides for removal.  N and P levels are reduced significantly and captured in the sludge.

- Micro filtration of water to remove solids and coagulants larger than 0.45 micron (human hair is approximately 100 micron in diameter) with a 99% efficiency at flow rates of 4-6 times that of existing sand filters produces clear water and a separated sludge.  Pathogens are destroyed and resources may be recovered from the sludge if present in commercial volumes. Solid hydrocarbons such as coal fines are also captured in the sludge. Salts/chlorides are also reduced further often generating water suitable for agricultural use or further processing. Backwash is minimal in volume and time .

- Clean water with higher levels of chlorides may be treated using solar distillation to, recover the salts for sale and generation of distilled water.  Alternatively clean water (post CrossFlow filtration) may be fed through a smaller RO plant saving up to 35% of operating costs due to higher efficiencies associated with reduced particle size minimising membrane blockage.  Water may be potentially released for river, agricultural and municipal use or vaporised into the atmosphere using a new, patented equipment which alleviates the needs for high pressure pumps and vaporisation nozzles.

- Energy recovery is achieved where there are more than 1% hydrocarbons present in the contaminated waste sludge. A process of secondary combustion utilises the waste to generate significant energy and heat which is harvested in boilers or used directly by GE generators.  Additional surplus heat may be used for industry or drying materials.

ADVANTAGE

Our advantage is the ability to comprehensively clean regulated wastes and recover valuable resources in a continual flow process, thus eliminating the need for sludge and contaminated water storage system and often the need for RO plants. Where chloride level are high we feed clean water, as opposed to dirty water, into a solar distillation system or RO equipment, thereby saving up to 35% in operating costs of a RO plant.  Regulated waste with resident hydrocarbons of >1% are transformed into high volumes of green energy, clean air and fly ash, leaving separated clean water available for reuse. Significant net energy generation means no external power is used and carbon credits are created from what was previously a regulated waste. End to End Solution. (We treat blackjack, oils and grease and similar materials comprehensively and commercially)


REPÂRATOR END TO END SOLUTION

“Excellence in innovation for extraordinary results”

CSG SYSTEM FLOW

THREE BENEFITS

  • CLEAN WATER FOR INDUSTRIAL / AGRICULTURAL USE
  • GREEN ELECTICITY AND HEAT  GENERATION
  • TREATMENT OF MUNICIPAL WASTE FOR COMPREHENSIVE INCORPORATION ACHIEVING ENVIRONMENTAL